Safety Instructions Always wear safety glasses and gloves. Insert the burs/bits to the full depth of the tool and in accordance to the manufacturer of the instrument and secure in place. Do not use the tool at speeds above those indicated by the manufacturer. Do not use tools that are not in perfect working order. Full speed should be reached prior to contact with the material to be cut or ground. Warning: Always check to see if the bur/bit is bent prior to usage. If bent or broken discard immediately. Use of a bent bur/bit can be dangerous to the user and onlookers. Use as little pressure as possible on all burs/bits. Use an approriate cooling medium for smoother cuts and to reduce heat buildup. Do not use the tool in a jerking, twisting, or pulling motion. Manufacturer's recommended safe speed is 50% of the ISO maximum. Material Safety Data Sheets (MSDS) are available. Please call, write, or e-mail to request an MSDS free of charge. Thank you for visiting A&M Instruments, Tools and Machining. Please e-mail any suggestions or comments to improve the site, our service, or tool selection. Always wear proper eye protection and gloves when using any cutting or grinding tool. ALL diamond tools last longer if a lubricant or coolant is used during cutting or grinding. Copyright® 2002-2006 A&M Instruments Inc 1-866-264-4287